The paper jammed as the machine pulled in the printed paper.
Resolution
Remove the jammed paper following the procedure below -
NOTE- If the printed paper piles up on the paper output slot, the machine may pull it in and the paper jams inside the machine. Remove the printed paper from the paper output tray before it amounts to 50 sheets.
The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent faxes are stored in the machine's memory. Make sure the machine completed sending or receiving all faxes before disconnecting the power cord. If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
1. Press the [Stop] button to cancel any print jobs and turn off the machine.
2. Detach the rear cover.
3. Detach the transport unit cover.
4. Pull out the paper slowly. NOTE - Do not touch the inner parts of the machine. If you cannot pull out the paper, open the paper output tray.
5. Attach the transport unit cover.
6. Attach the rear cover.
If you were not able to remove the paper in step 4 continue below:
7. Detach the lower and upper cassettes.
8. Pull out the paper slowly.
9. If the paper is not loaded properly in the cassette, remove the paper, and then reload it after aligning the edges of the sheets. NOTE - When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly.
10. Attach the cassettes to the machine, and then press the [OK] button.
Labels: [ fix error 1313 in canon MX Printers, How to fix error 1313 in canon MX series Printers, paper jammed as the machine pulled in the printed paper, you were not able to remove the paper]
Guangzhou Chenshenfu Trade Co., Ltd. is a professional manufacturer and exporter that is concerned with the design, development and production of Printer Supplies Industry. And we have our own brand “EBY”. We are located in Zhuhai.
All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Covering an area of 8500 square meters, we now have over 1500 employees, an annual sales figure that exceeds USD 152 million and are currently exporting 99% of our production worldwide.
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we have received ISO9001. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching all over the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
How to Fix Printer Offline Problems - Setting up a Static IP address
These settings are for setting up your wireless or wired printers to:
Mainly for HP printers but works for Brother.
* Stay connected to your router
* Fix printer ‘offline’ status
* Wake from sleep mode
* Speed up wireless printing
While DHCP is convenient, devices such as printers (wired and wireless) should always be assigned a static (fixed) IP address manually to avoid conflicts on your wireless network and MUST be outside the DHCP address range of the router. This is because printers are the only external devices that do not have the ability to automatically interrupt the router for a new DHCP address once the least time expires. Again, do not have the printers static IP within the DHCP range of the router as this is against Networking 101 rules and will confuse the router.
After setting the static IP, the computer(s) must be updated under Printer Properties/Ports to show a Standard TCP/IP port with the printers’ new static IP address.
1. Set a static IP in the printer outside the DHCP range of the router (check your manual). This Static IP is important as DHCP IP addresses will change upon different power up sequences of your devices. You always want your printer to come up with the same IP address all the time. See how to do this here: Cut and paste.
This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this first if needed. Then after setting the static IP in the printer, the computer(s) must be updated under Printer Properties/Ports to show a Standard TCP/IP port with the printers IP address.
To see why this problem exists and how to fix it, watch this video here for Windows. Scroll down for MAC information. Cut and paste
How to set a Standard TCP/IP port. This is important.
a.Click Start/Devices and Printers. Right click on your HP Printer. Select Printer Properties. Select the Ports tab at the top.
b. Select Add Port. Select Standard TCP/IP Port. Select New Port.
c.Follow the Add Port Wizard. Under Printer Name or IP Address, input the Static IP address you just set from the above information. Example: 192.168.1.15. The IP address will be copied under Port Name. This is OK to leave this alone or you can put in your Printer Model.
d. Select Next and Finish the Wizard.
If you create a TCP/IP port without a static IP above, you may lose your TCP/IP connection and have the same issue. This is because your network has powered up differently giving you a different DHCP address to the printer that does not match the TCP/IP address above. This could occur at anytime just like the video shows.
For MAC PCs perform the above Static IP setting in the router and then watch here on how to perform your IP setting for MAC computers. Cut and paste.
By performing the above, the printers Embedded Web Server (EWS) will now work all the time by going to your Printers Static IP address in your browser.
2. Verify in the printer that 'Auto Off/Sleep/Energy Saving Mode' is disabled and/or the System Mode Time Out is set to zero (0) if your printer supports this. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto Off, or use the Printer Assistant, Printer Home Page (EWS). Also check your Printer Properties. This feature is automatically disabled when the printer is connected to a computer or mobile device, a network, or a fax line (if supported). However, you may not find this setting.
3. If the printer supports and has IPv6 enabled, disable IPv6 in the printer.
4. Make sure printer is plugged directly into a wall outlet and not into a UPS, power strip or surge protector. This may cause the printer to intermittently drop offline and disconnect.
5. Make sure your printer and router are at least 5 feet apart from each other.
6. Check the web site for your printer to see if there is a Firmware Upgrade that affects the wireless operation.
